A full complement of fire pump controllers you can count on to start every time without fail.
Alarm Panels
Firetrol® FTA200 alarm panels are designed to meet the NFPA 20 specifications requiring a remote alarm panel when the pump house or pump room is not constantly attended. The alarm panel must be installed in a location that is under supervision at all times. Firetrol alarm panels are listed by Underwriters Laboratories, Inc., in accordance with UL508, Standard for Industrial Controls, certified by CSA, Standard for Industrial Control Equipment (cUL), approved by the New York City Bureau of Electrical Control and Board of Standards and Appeals and Factory Mutual.
Jockey XG Pump Controllers
Firetrol® Jockey XG Pump Controllers are intended for use with fire pump systems. They are used for pressure maintenance in fire pump installations to prevent unnecessary cycling of the main fire pump.
Electric Fire Pump Controllers
Firetrol Fire Pump Controllers are factory assembled, wired and tested as a unit. The controllers are UL listed and FM Approved*. They completely conform to the latest edition of NFPA-20, Installation of Stationary Pumps for Fire Protection and NFPA-70, National Electrical Code.
* FTA750 Limited Service Controllers are not FM approved at this time.
Diesel Engine Fire Pump
Firetrol® combined automatic and manual Mark II based diesel engine fire pump controllers are intended for starting and monitoring fire pump diesel engines. They are available for use with 12 or 24 volt negative ground systems using lead acid or nickel-cadmium batteries. The controller monitors, displays and records fire pump system information
Medium Voltage Fire Pump Controllers (7200V max.)
FTA2000 Series Firetrol ® Medium Voltage Fire Pump Controllers are UL Listed, FM Approved, conforming to the latest edition of NFPA-20 and NFPA-70. Voltages from 2,300 through 7,200.
Power Transfer Switches
Firetrol® Power Transfer Switches are available completely assembled with Firetrol Limited Service Controllers. The entire package of power transfer switch and controller is completely factory assembled, wired, tested and shipped as a complete unit for easy field connection to the power sources and the fire pump motor.